Practical Use Cases for Scroll-Linked Animations in CSS with Scroll Timelines

The Scroll-Linked Animations specification is an upcoming and experimental addition to CSS. Using the @scroll-timeline at-rule and animation-timeline property this specification provides you can control the time position of regular CSS Animations by scrolling.

In this post, we take a look at some practical use cases where scroll-linked animations come in handy, replacing a typical JavaScript approach.

👨‍🔬 The CSS features described in this post are still experimental and not finalized at all. The are not supported by any browser at the time of writing, except for Chromium ≥ 89 with the #experimental-web-platform-features flag enabled.

CSS Scroll-Linked Animations, a quick primer

With CSS Scroll-Linked Animations, you can drive a CSS animation by scroll: as you scroll up or down inside a scroll container, the linked CSS animation will advance or rewind. Best of all is that this is all running off main thread, on the compositor.

You need three things to implement a basic scroll-linked animation:

  1. a CSS animation
  2. a scroll timeline
  3. a link between both

CSS animation

This is a regular CSS Animation like we already know:

@keyframes adjust-progressbar { from { transform: scaleX(0); } to { transform: scaleX(1); }
}

As you normally do, attach it to an element using the animation property:

#progressbar { animation: 1s linear forwards adjust-progressbar;
}

Scroll timeline

The scroll timeline allows us to map the scroll distance to the animation progress. In CSS, we describe this with the CSS @scroll-timeline at-rule.

@scroll-timeline scroll-in-document-timeline { source: auto; orientation: vertical; scroll-offsets: 0%, 100%;
}

This at-rule consists of descriptors, including:

  1. The source describes the scrollable element whose scrolling triggers the activation and drives the progress of the timeline. By default, this is the entire document.
  2. The orientation determines the scrolling direction that should trigger the animation. By default, this is vertical.
  3. The scroll-offsets property is an array of key points that describe the range in which the animation should be active. It can be absolute values (e.g. percentages and lengths) or element-based.

A previous version of the specification required you to also set a time-range descriptor. This descriptor has been removed and will automatically take over the animation-duration from the linked animation. You may still see traces of it in the demos, but you can safely ignore it.

To associate our @scroll-timeline with our CSS animation, we use the new animation-timeline CSS property, and have it refer to the timeline’s name.

#progressbar { animation: 1s linear forwards adjust-progressbar; animation-timeline: scroll-in-document-timeline; /* 👈 THIS! */
}

With that set up the adjust-progressbar animation won’t run automatically on page load, but will only advance as we scroll down the page.

For a more in-depth introduction to @scroll-timeline please refer to Part 1 and Part 2 of my series on the future of scroll-linked animations.

The first post looks at each descriptor/property in more detail, explaining them with an example to go along with them, before covering many more interesting demos.

The second post digs even deeper, looking into Element-Based Offsets, which allow us to drive an animation as an element appears into and disappears from the scrollport as we scroll.

An example of what you can achieve with CSS Scroll-Linked Animations using Element-Based Offsets.

Practical use cases

Apart from the progress par demo above, there are a few more use cases or scenarios where scroll-linked animations can replace a solution typically implemented using JavaScript.

  1. parallax header
  2. image reveal/hide
  3. typing animation
  4. carousel indicators
  5. scrollspy

Parallax header

A typical use case for Scroll-Linked Animations is a parallax effect, where several sections of a page seem to have a different scrolling speed. There’s a way to create these type of effects using only CSS, but that requires mind-bending transform hacks involving translate-z() and scale().

Inspired upon the Firewatch Header—which uses the mentioned transform hack—I created this version that uses a CSS scroll timeline:

Compared to the original demo:

  • The markup was kept, except for that extra .parallax__cover that’s no longer needed.
  • The <body> was given a min-height to create some scroll-estate.
  • The positioning of the .parallax element and its .parallax_layer child elements was tweaked.
  • The transform/perspective-hack was replaced with a scroll timeline.

Each different layer uses the same scroll timeline: scroll over a distance of 100vh.

@scroll-timeline scroll-for-100vh { time-range: 1s; scroll-offsets: 0, 100vh;
} .parallax__layer { animation: 1s parallax linear; animation-timeline: scroll-for-100vh;
}

What’s different between layers is the distance that they move as we scroll down:

  • The foremost layer should stay in place, eg. move for 0vh.
  • The last layer should should move the fastest, e.g. 100vh.
  • All layers in between are interpolated.
@keyframes parallax { to { transform: translateY(var(--offset)); }
} .parallax__layer__0 { --offset: 100vh;
} .parallax__layer__1 { --offset: 83vh;
} .parallax__layer__2 { --offset: 67vh;
} .parallax__layer__3 { --offset: 50vh;
} .parallax__layer__4 { --offset: 34vh;
} .parallax__layer__5 { --offset: 17vh;
} .parallax__layer__6 { --offset: 0vh;
}

As the foremost layers move over a greater distance, they appear to move faster than the lower layers, achieving the parallax effect.

Image reveal/hide

Another great use-case for scroll linked animations is an image reveal: an image slides into view as it appears.

By default, the image is given an opacity of 0 and is masked using a clip-path:

#revealing-image { opacity: 0; clip-path: inset(45% 20% 45% 20%);
}

In the end-state we want the image to be fully visible, so we sent the end-frame of our animation to reflect that:

@keyframes reveal { to { clip-path: inset(0% 0% 0% 0%); opacity: 1; }
}

By using element-based offsets as our scroll timeline offsets, we can have it so thar the image begins to appear only when the image itself slides into view.

@scroll-timeline revealing-image-timeline { scroll-offsets: selector(#revealing-image) end 0.5, selector(#revealing-image) end 1 ;
} #revealing-image { animation: reveal 1s linear forwards; animation-timeline: revealing-image-timeline;
}

😵 Can’t follow with those element-based offsets? This visualization/tool has got you covered.

Typing animation

As CSS scroll timelines can be linked to any existing CSS animation, you can basically take any CSS Animation demo and transform it. Take this typing animation for example:

With the addition of a scroll timeline and the animation-timeline property, it can be adjusted to “type on scroll”:

Note that to create some scroll-estate the <body>was also given a height of 300vh.

Using a different animation, the code above can easily be adjusted to create a zoom on scroll effect:

I can see these two working great for article intros.

One of the components of a carousel (aka slider) is an indicator that exposes how many slides it contains, as well as which slide is currently active. This is typically done using bullets.

This again is something we will be able to achieve using a CSS scroll timeline, as shown in this demo created by Fabrizio Calderan:

The active state bullet is injected via .slider nav::before and has an animation set that moves it over the other bullets

/* Styling of the dots */
.slider nav::before, .slider a { inline-size: 1rem; aspect-ratio: 1; border-radius: 50%; background: #9bc;
} /* Positioning of the active dot */
.slider nav::before { content: ""; position: absolute; z-index: 1; display: block; cursor: not-allowed; transform: translateX(0); animation: dot 1s steps(1, end) 0s forwards;
} /* Position over time of the active dot */
@keyframes dot { 0% { transform: translateX(0); } 33% { transform: translateX(calc((100% + var(--gap)) * 1)); } 66% { transform: translateX(calc((100% + var(--gap)) * 2)); } 100% { transform: translateX(calc((100% + var(--gap)) * 3)); }
}

By attaching a @scroll-timeline onto the slider, the dot that indicates the active state can move as you scroll:

@scroll-timeline slide { source: selector(#s); orientation: inline; } .slider nav::before { /* etc. */ animation-timeline: slide;
}

The dot only moves after the slide has snapped to its position thanks to the inclusion of a steps() function in the animation. When removing it, it becomes more clear how the dot moves as you scroll

💡 This feels like the final missing piece to Christian Shaefer’s CSS-only carousel.

ScrollSpy

Back in early 2020, I created a sticky table of contents with scrolling active states. The final part to creating the demo was to use IntersectionObserver to set the active states in the table of contents (ToC) as you scroll up/down the document.

Unlike the carousel indicators demo from above we can’t simply get there by moving a single dot around, as it’s the texts in the ToC that get adjusted. To approach this situation, we need to attach two animations onto each element in the ToC:

  1. The first animation is to visually activate the ToC item when the proper section comes into view at the bottom edge of the document.
  2. The second animation is to visually deactivate the ToC item when the proper section slides out of view at the top edge of the document.
.section-nav li > a { animation: 1s activate-on-enter linear forwards, 1s deactivate-on-leave linear forwards;
}

As we have two animations, we also need to create two scroll timelines, and this for each section of the content. Take the #introduction section for example:

@scroll-timeline section-introduction-enter { source: auto; scroll-offsets: selector(#introduction) end 0, selector(#introduction) end 1;
} @scroll-timeline section-introduction-leave { source: auto; scroll-offsets: selector(#introduction) start 1, selector(#introduction) start 0;
}

Once both of these timelines are linked to both animations, everything will work as expected:

.section-nav li > a[href"#introduction"] { animation-timeline: section-introduction-enter, section-introduction-leave;
}

In closing

I hope I have convinced you of the potential offered by the CSS Scroll-linked Animations specification. Unfortunately, it’s only supported in Chromium-based browsers right now, hidden behind a flag.

Given this potential, I personally hope that—once the specification settles onto a certain syntax—other browser vendors will follow suit. If you too would like to see Scroll-Linked Animations land in other browsers, you can actively star/follow the relevant browser issues.

By actively starring issues, us developers can signal our interest into these features to browser vendors.


The post Practical Use Cases for Scroll-Linked Animations in CSS with Scroll Timelines appeared first on CSS-Tricks. You can support CSS-Tricks by being an MVP Supporter.